Digital image correlation in experimental mechanics and image registration in computer vision: Similarities,differences and complements

Digital image correlation and image registration or matching are among the most widely used techniques in the fields of experimental mechanics and computer vision, respectively. Despite their applications in separate fields, both techniques primarily involve detecting the same physical points in two or more images. In this paper, a brief technical comparison of the two techniques is reviewed, and their similarities and differences as well as complements are presented. It is shown that some concepts from the image registration or matching technique can be applied to the digital image correlation technique to substantially enhance its performance, which can help broaden the applications of digital image correlation in scientific research and engineering practice.     

Statistical analysis of S/N-curves by means of a fatigue database for polypropylene

Material databases of plastics are becoming more and more the focus of applied science and commercial use in industry. Material properties of material manufacturers are often provided in publicly accessible material databases, which usually contain processing and mechanical properties under static loadings. Fatigue strength values are usually not accessible. The fatigue data for thermoplastics is of particular interest, as these materials have a particularly high lightweight construction potential and can be processed with a high degree of automation and reproducibility.Individual fatigue strength parameters for a specific material, environmental condition, geometry and loadings have been investigated in numerous publications. However, no work has been found in which fundamental interactions of different materials, environmental conditions, geometries and loadings on the course of the S/N-Curve have been investigated.In this paper, different effect relationships between temperature, filler type and filler content, fiber orientation and load ratio will be presented for the material Polypropylene (PP). A fatigue strength database of 11 different material manufacturers, from 71 different S/N-Curves with 606 tested samples, serves as a basis. The fatigue database enables a digital twin, which is used for the design of structural components to add a third dimension with artificial intelligence, and which is trained by an engineer. From the determined effect relationships, fatigue factors are to be derived and can be used to evaluate the fatigue strength of a component in the design process and to train the digital twin. The fatigue-strength values from the database also allow a statistical consideration of the slope k and the scattering of the S/N-Curve. The different S/N-Curves are transferred into a Haigh diagram, from which the functional course of the mean stress is determined.     

A technique for in situ X-ray computed tomography of deformation-induced cavitation in thermoplastics

Deformation-induced cavitation influences the mechanical response of polymeric materials, but acquiring in situ measurements of the spatial evolution of cavities has typically necessitated the use of synchrotron radiation sources. The objective of this study is to develop and demonstrate a method allowing for in situ measurements of deformation-induced cavitation in axisymmetric polymer specimens, using a home-laboratory X-ray computed tomography setup. The method is demonstrated by assessing deformation-induced cavitation of mineral-filled PVC in a repeated loading-unloading experiment. A temporal resolution of about 3 s is obtained by exploiting the axisymmetry of notched round tensile specimens. The evolution of relative density was captured throughout the experiment, revealing an interplay between void nucleation and void growth. Combined with surface deformation measurements obtained by digital image correlation, the present technique yields data suitable for calibration and validation of material models.     

An experimental method for eliminating effect of rigid out-of-plane motion on 2D-DIC

The out-of-plane motion is one of the most important factors that affect the precision of two-dimensional digital image correlation (2D-DIC). In this paper, a novel solution is presented to improve conventional 2D-DIC by eliminating the effect of out-of-plane motion, including translation and rotation. Firstly, an experimental technique using two projected laser strips is proposed to measure the out-of-plane motion of a planar specimen. A theoretical model is then established to predict the pseudostrains caused by out-of-plane motion based on the pin-hole imaging model. Using the measured out-of-plane displacement, the captured deformed images used in 2D-DIC are amended to eliminate the effect of out-of-plane motion by the theoretical model. Finally, two experiments were conducted to validate the effectiveness of the proposed method. Results indicate that application of the proposed method can effectively eliminate the errors caused by out-of-plane motion.     

Electrical actuation of dielectric droplets by negative liquid dielectrophoresis

This paper presents an electrical actuation scheme of dielectric droplet by negative liquid dielectrophoresis. A general model of lumped parameter electromechanics for evaluating the electromechanical force acting on the droplets is established. The model reveals the influence of actuation voltage, device geometry, and dielectric parameter on the actuation force for both conductive and dielectric medium. Using this model, we compare the actuation forces for four liquid combinations in the parallel-plate geometry and predict the low voltage actuation of dielectric droplets by negative dielectrophoresis. Parallel experimental results demonstrate such electric actuation of dielectric droplets, including droplet transport, splitting, merging, and dispending. All these dielectric droplet manipulations are achieved at voltages < 100 V_rms. The frequency dependence of droplet actuation velocity in aqueous solution is discussed and the existence of surfactant molecules is believed to play an important role by realigning with the AC electric field. Finally, we present coplanar manipulation of oil and water droplets and formation of oil-in-water emulsion droplet by applying the same low voltage.     

Differentiating bulk nanobubbles from nanodroplets and nanoparticles

History has shown that it is not as easy as one might think to differentiate between bulk nanobubbles and nanodroplets or nanoparticles. It is generally easy to detect colloids (i.e. something that looks different, e.g. scatters light differently than its surrounding solvent), but less easy to determine the nature of these colloids. This has led to misinterpretations in the literature, where nanodroplets or nanoparticles have mistakenly been assumed to be nanobubbles. In this paper, we review a multitude of experimental methods and approaches to prove the existence of bulk nanobubbles. We conclude that combinations of optical detection with physical perturbations such as pressure or ultrasound, or phase-sensitive holographic methods are the most promising and convenient approaches.     

Two low-cost digital camera-based platforms for quantitative creatinine analysis in urine

In clinical analysis creatinine is a routine biomarker for the assessment of renal and muscular dysfunctions. Although several techniques have been proposed for a fast and accurate quantification of creatinine in human serum or urine, most of them require expensive or complex apparatus, advanced sample preparation or skilled operators. To circumvent these issues, we propose two home-made platforms based on a CD Spectroscope (CDS) and Computer Screen Photo-assisted Technique (CSPT) for the rapid assessment of creatinine level in human urine. Both systems display a linear range (r² = 0.9967 and 0.9972, respectively) from 160 μmol L⁻¹ to 1.6 mmol L⁻¹ for standard creatinine solutions (n = 15) with respective detection limits of 89 μmol L⁻¹ and 111 μmol L⁻¹. Good repeatability was observed for intra-day (1.7–2.9%) and inter-day (3.6–6.5%) measurements evaluated on three consecutive days. The performance of CDS and CSPT was also validated in real human urine samples (n = 26) using capillary electrophoresis data as reference. Corresponding Partial Least-Squares (PLS) regression models provided for mean relative errors below 10% in creatinine quantification.     

Experimental study on the fiber pull-out of composites using digital gradient sensing technique

A method to measure the stress field at the fiber tip in the fiber pull out test was proposed by using a digital gradient sensing technique. First, the principle of digital gradient sensing is introduced, and the non-contact optical system of digital gradient sensing developed. Then, a fiber reinforced composite model specimen, where a nail was inserted in epoxy resin to act as a fiber, was performed, and a pull out test was conducted on the specimen using the digital gradient sensing technique. Finally, the angular deflections contour at the fiber tip was obtained, and the stress intensity factor was extracted from the angular deflections. The results show that the stress intensity factor at the fiber tip extracted from the angular deflections agreed with the results calculated by the finite element method.